MISSION STATEMENT

STEAMATIC IS COMMITTED TO MAKING OUR CUSTOMERS 100% SATISFIED.

What to do after a Water Damage:

• Turn off the source of water and call repair service.
• Call Steamatic to get a restoration crew on their way. 
• Elevate all furniture on unstained wood blocks or aluminum foil.
• Remove wet upholstery cushions for even drying.
• Wipe wood furniture dry.
• Remove any colored rugs from carpet .
• Elevate all draperies off carpet using clothes pins or hang on drapery rod by looping through coat hanger.
• Remove anything off the floor that might leave a stain including clay pots, magazines and papers
• Turn air conditioning on to aid drying during the summer.

What NOT to do after a Water Damage:

• DO NOT use TV's or other electrical appliances while standing on wet carpets or floors.
• DO NOT use ceiling fixtures if ceiling is wet.
• DO NOT enter rooms where ceilings are sagging from retained water.
• DO NOT underestimate the amount of water in your carpet, pad, or walls.
• DO NOT lift tacked down carpet while carpet is wet to avoid damage.

Water Extraction and Water Damage Restoration Steps

1. Inspection & Assessment

Steamatic technicians will inspect the water damage, prepare a cost estimate and develop a restoration plan. Steamatic technicians can begin work immediately upon plan acceptance.

2. Water Removal

Technicians will extract any standing water immediately. Quick action following water damage may help prevent further damage and mold growth.

3. Stabilize the Environment

Dehumidifiers are installed to control moisture levels in both the structure and contents. Dehumidifiers pull moisture from the air and return warm, dry air. The process is assisted by high velocity air movers to evaporate moisture.

4. Monitor Drying Process

Steamatic technicians will regularly monitor the drying process with various moisture meters for wood, concrete, floors and walls. Temperature and humidity measurements are taken throughout the drying process.

5. Re-lay / Replace Flooring

Carpets and flooring can be re-laid or replaced once the structure is clean and dry.